Experience a Soft and Bouncy Acrylic Alice.
This case differentiates itself from other acrylic keyboards on the market by not being designed around sandwich plate mounting. Instead, the plate in this design is mounted above 6x soft silicone O-rings — similar to burger mounting.
Additionally, this case accepts standard Alice plates, making it easier to try other plate materials such as Brass, Aluminum, Fr4 ect.
The official plate file can be found here.
Build Guide:
https://acrylicperipherals.com/blog/idyllic-cases-build-guide
Alice plates are sold separately:
Purchase Alice plates here.
Please add to your cart during checkout.
- Laser cut from 3mm acrylic
- Accepts standard Alice plates*
- Burger Mount (O-ring + bottom mounted plate)
- 7 degree typing angle
- Acrylic Case - Satin top piece with clear middle acrylic pieces
- Satin acrylic feet - 4 pieces of acrylic
- Hardware - Screws, standoffs, bumpons, O-rings
-
Valor Rev2 PCB - USB Type C, hotswap sockets, RGB side-glow
(RRP of 90AUD)
Hot Swap PCB is a Fixed Layout:
- Split BS, Stepped Caps, Split Right Shift
THIS DESIGN ONLY ACCEPTS THE VALOR PCB.
NOT compatible with an other Alice PCB.
Disclaimer:
* Not every Alice plate has been tested and some end-user modification may be required.
Not compatible with MT3 Keycaps. Keycaps not included.
Do not clean with Isopropyl alcohol.
Rinse or wipe the case with water or an electrostatic remover as there is a possibility of lingering static, which may damage your PCB.
A protective layer is still attached to the acrylic pieces and needs to be removed. Dust is easily attracted when removing this film, so I recommend having a damp microfiber cloth on-hand. BE CAUTIOUS FOR ESD.
May have some slight variation on the edges of each acrylic layer due to the nature of Laser Cutting, however great attention is given to ensure the straightest and most consistent edge alignment possible.