Adhesive Stabiliser PCB Shims

Use Standard Stabilisers on 1.2mm PCBs 

Stabilizer shims for Keyboard PCBs.
These stickers go on the underside of your 1.2mm PCB and help add a bit more thickness. 

Each sticker is 0.2mm thick, and you will need to stack 2x per stabiliser leg to reach the needed 0.4mm.

Each Stabiliser will require 4x stickers total; 2x on each side.

The advantage of using an adhesive material is that the shim will stay in place and not fall off; this makes installing stabilisers less "fiddly". 
It is not advised to peel this stick off once applied to the PCB.

Details

• Lasercut from an Adhesive 0.2mm Material
• Gloss Gold Colour
  
• 26x Stickers / enough for 6x Stabilisers
• Made in Brisbane, Australia

Disclaimer
Some scratches may be present on surface of the material