[Clearance] Float60 - Half Plate Kit

Float like a Butterfly, Type on a Trampoline!

This playful 60% kit features an O-ring, bottom-mounted, stacked-acrylic design, perfect for those seeking a smaller sized board with a soft typing feel and modest flex.

Each kit includes a soft plastic plate and solder PCB. Once built, the premium Wilba Weird Flex will be visible from the underside.

About the Plate Materials:
Impact Modified Acrylic has a stiffness between POM and PC. This is the recommended material because it's a nice balance of "feel" and "sound". 

Polypropylene (PP) is very flexible and makes switches sound deeper. This option is only recommended for those who want to try something different.

Kit Includes:
- 1.5mm Half Plate - Impact Modified Acrylic or Polypropylene (PP)
- 1.6mm WT60-D Weird Flex
- Acrylic Case - Frosted Top, Clear Middle, Frosted Feet
- Hardware - Screws, Standoffs, Bumpons

Case Details:
- 19.5mm Front Height x 22.5mm Rear Height (without Bumpons)
- 6 Degree Typing Angle
- 680g Full Build Weight 

Plate Layout:

• TSANGAN / WKL / HHKB Layout - 7u Spacebar
• Stepped or Regular Caps Lock
• Full or Split Backspace

Not included and you will still need need:
- Stabiliser - PCB Mount
- MX Switches
- Keycaps 
- USB Type C Cable

Disclaimer:

Soldering is required. Mill Max is not recommended. 

Do not clean with Isopropyl alcohol. Rinse or wipe acrylic with water or an electrostatic remover as there is a possibility of lingering static, which may damage your PCB.

A protective layer is still attached to the acrylic pieces and needs to be removed. Dust is easily attracted when removing this film, so I recommend having a damp microfiber cloth on-hand. BE CAUTIOUS FOR ESD.

May have some slight variation on the edges of each acrylic layer due to the nature of Laser Cutting, however great attention is given to ensure the straightest and most consistent edge alignment possible.